CDA HN3621FR, Инструкция по установке, эксплуатации и обслуживанию, Страница: 11 / 28

11
Using the “+” and “-” selectors (4 and 5), set the desired cooking
time (in minutes) to between 0 and 99. The selection will confirm in
approximately 2 seconds, the timer display will show the time set
and the countdown will start.
• If no time is set within ten seconds, the timer display (6) will
become inactive and the zone will continue cooking.
At the end of the timer, the selected zone will switch off and the
timer display, and relevant time indicator light, will flash. The hob will
beep for approximately two minutes. To switch off the beep and the
flashing displays, touch any key. This beeping also occurs after the
minute minder time has elapsed and the same process to switch off
the beep applies.
Please note: The timer duration can be adjusted at any time during
the countdown. Simply touch the relevant cooking zone selector (3) so
that the zone display (2) brightens, then press the “+” and “-” setting
selectors simultaneously and adjust the minutes using the “+” and “-”
setting selectors.
Please note: The power level can be adjusted at any time during the
countdown.
To cancel the timer
• Touch the cooking zone selector (3) for the required zone so that
the cooking zone display (2) brightens. Press the “+” and “-” setting
selectors simultaneously and then use the “-” setting selector to
return the timer displays to 0.