15
How to Install the Hob
Overall dimensions of the hob:
Width: 575 mm Depth: 510 mm
Worktop cut-out dimensions:
Width: 560 mm Depth: 495 mm
1 - Worktop
3 - Ceramic hob
3
2
1
2 - Hob seal
Fig.6
1. Make the required hole in the worktop.
Before doing this, you must check the
instructions supplied with any cooker hood to ensure that you will
have the required clearance. The cutout in Fig.7 shows a minimum
50mm gap from the rear wall or splashback to the cut out edge
Rear Wall
Front edge of worktop
Adjacent vertical surface
(cupboard etc. -
Measurement applicable
to both sides.)
560
495
Min.
Cut-out
50
Min. 60
Min.
55
2. Make sure that the worktop is clean and dust free and insert the
hob into the cut-out opening. Press the hob firmly into place so
that the seal connects with the worktop (Fig. 6).
Fig.7
