32
Installation
Transit bolts, located at the rear of the appliance, must be removed
prior to using the appliance to prevent damage. There are four in
total.
• Remove the back cover from the
machine.
• Loosen the transit bolts using a
suitable spanner by turning them
anti-clockwise and then remove
them.
• Remove the bolts and plastic spacers that were retained by the
transit bolts.
• Cover the bolt holes with the plastic plugs supplied.
Do not throw the transit bolts or plastic spacers away. If you need
to move the washing machine after installation you should first
replace the transit bolts and spacers.
Do not install your machine on rugs or similar surfaces.
For your machine to work quietly and without any vibration, it should
be installed on a flat, non-slippery and solid surface.
The machine must be positioned on a solid support, such as the bare
floor or a well-fitting riser, ensuring the machine is unable to fall when
subjected to the typical vibrations generated by a washing machine.
The machine must not be fitted near heat sources, nor near
Fig. 15
Содержание CI327
Страница 1: ...CI327 Integrated washing machine Installation use and maintenance ...
Страница 24: ...24 Fig 8 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 ...
Страница 40: ...40 CP Fig 22 Fig 23 Fig 24 ...
