31
Fault
Probable cause
Methods of elimination
The machine does
not drain water.
The drain hose is obstructed or
bent.
Check the drain hose.
The pump filter is obstructed.
Clean the pump filter.
The drain hose is above 100cm.
Install drain hose at specified height of
80-100cm.
The machine is
vibrating.
Not all transit bolts have been
removed.
Remove all the transit bolts.
The machine is located on an
uneven surface or is not levelled.
Ensure the machine is located on an even
surface and is correctly levelled.
There is only a small load in the
machine.
This is not indicative of a fault.
The washing machine is
overloaded, or badly loaded.
Do not exceed the load capacity, and
ensure the clothes are loaded evenly.
The washing machine is leaning
on a solid object.
Ensure the machine is installed away from
other objects.
The machine stops
before completing its
wash cycle.
Water or electricity failure.
Check the power and water supplies.
Operation stops for a
period of time.
Washing machine gives an error
message.
Check display codes.
Washing machine is in a soaking
cycle.
Press the “Start / Pause” button again to
cancel it. Consider a drain cycle.
Excessive foam in
the drum.
The detergent is not a low
foaming type.
Check if the detergent is suitable.
Excessive amount of detergent
used.
Reduce amount of detergent used.
Washing time has
changed
automatically.
The washing programme duration
has been changed.
This is not a fault and is a feature of the
machine.
The machine fails to
spin.
Unbalanced load.
Add more clothes or try running the spin
cycle again.
Содержание CI327
Страница 1: ...CI327 Integrated washing machine Installation use and maintenance ...
Страница 24: ...24 Fig 8 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 ...
Страница 40: ...40 CP Fig 22 Fig 23 Fig 24 ...
