CCV InSync, Системное руководство

Страница: 25 / 30

CCV InSync System Manual Rev.03 04/2019 PA91P003 | Page 25
Note: The main adapter available for testing purposes (starter kit) is only
suitable for testing purposes in the laboratory and must not be used in
production.
Buffer battery Integrated lithium ion battery for buffering SRAM and clock. Service life: up to 8
years when stored at around 25°C and voltage supply in at least 50 % of that
time.
Dimensions Front panel: 84 x 105 x 24.3 mm ± 0.1 mm
Interior: 53 x 73 x 78 mm ± 0.1 mm
EVA cut-out: 61 x 73 mm ± 0.2 mm
Weight 310g ± 5%
Remarks about the lithium battery
To secure data and the clock function and for the safety circuit, the terminals are equipped with a lithium battery.
This battery cannot be replaced without opening the housing. The service life of the battery is approx. 8 years, when
the device is supplied with mains voltage in around 50% of this period. The ambient conditions for storage and
operation as described in this system manual must be observed for this purpose. Only the manufacturer CCV
Deutschland GmbH may replace the battery.
Please observe that lithium batteries must not be discarded with general waste but disposed of properly.
Make sure that lithium batteries are not damaged. Under certain circumstances, they can react strongly with water
or air.
Calculation example for the battery life:
Total capacity 1000 mAh
Consumption self-drain (10 years at -40°C ... +30°C): 100 mAh
Consumption storage period: 2 years 262 mAh
Option 1: Consumption operation with 0% external supply: 4 years 524 mAh
Option 2: Consumption operation with 50% external supply: 8 years 524 mAh
Option 3: Consumption operation with 62.5% external supply: 10 years 524 mAh
Minimum reserve 114 mAh