CCTV JE900BN, Руководство пользователя

Страница: 22 / 24

21
3.6.2 Start scanning between two points
a. Enter 132(102) and press “PREVIEW” key
b. Press “AUTO” key
3-7 Start 360° scanning function of the Pan/Tilt
The Camera can be 360° endless horizontal scanning. The operation is as below:
3-8 Stop the auto scanning
While the camera is carrying out auto scanning, if you want to stop the auto
scanning, you can enter 138 (108) and press “PREVIEW” key or press “zoom+”
“zoom-“ key to stop
3-9 The Setup, Activating and Exiting of Default Position
The unit has a default position. The user can set up default position for a key
monitoring area according to actual requirement. If not operated after 5 minutes, the
dome camera will automatically monitor the default position.
1. Setup of the Default Position
Move the dome camera to a key monitoring area by joystick, enter number “164”
(124) on the keyboard and press the “PREVIEW” key, then the setup is successful.
2. Activate and Exit the Default Position function
The user can activate or exit the function of default position through the
keyboard. Enter number “162” (122) and press the “PREVIEW” key, the function is
activated. Enter number “163” (123) and press the “PREVIEW” key, the function is
exited.