Call Forwa rd Always
Dial # 26 NN XXXX
Wher e, XXXX= Extensio n numb e r where Calls are to be forward ed . Flexible numb er (2-4 digits long)
N= the last two digits of the original Extensi o n.
Dial # 26 NN # (To clear the feature of N Extensio n )
Dial # 26 # (To clear the Call Forward Always feature of all the extensi o ns. T)
Call Forwa rd When Busy / No Answe r (This can also be used as Roun d Robin featu r e - Refer
“Junction Line Ring
Assignm ent” )
If calls are to be diverted only when the Extensio n is busy or is not answeri ng ,
then: Dial # 27 NN XXXX
Wher e, XXXX= Extensio n numb e r where Calls are to be forward ed . If flexible numb e ri ng is done then
enter the Flexible numb er.
If the Flexib le numb er is say 26 then XXXX will be = 26
& not 026.
N= The last two digits of the
origin al Exten sio n numb e r (No t the flexib le
numb er
) Dial # 27 NN # (To clear the feature of NN Extensio n
:
To cancel Call Forwardi ng Busy / No Answer of all the extensi o ns
:
Dial # 27 # from any of the program mi ng Extensi o ns.
:
To cancel all type of Call Forwardi ng of all the extensio ns :
Dial # 25 # from any of the program mi ng
Extensi o ns.
:
To retai n the Call Forwardi ng program mi ng after the PBX is switched
ON/O F F, Dial #*0000 + 171 # (Thi s is the default setting in the PBX)
:
To lose the Call Forwardi ng program mi ng after the PBX is switched ON/O F F ,
Dial #*0000 + 170 #
Ring Time chang e in Call Forwa rd When Busy / No Answer
The ring time on extensio n, in case of Call Forward , can be chang ed using the following program :
Dial #*0000 + 184 TT #
Wher e, TT= 01
– 99 Ring Time in seconds
Defaul t value = 20 secs
Note:
The time enter ed here, should be less than the Internal Call Ringing Time.
.
Call Pick-Up
.
PBX has a code f or call pick up as detailed below:
Dial # 9 - To pick up an incoming Junction call ringing on another extension.
It will pick the calls in f ollowing priority
- Junction Call being Transf erred
- Incoming Junction Call ringing
- Junction Call on Hold
- Door Phone Call
- Internal Call
Checking Extension Number
.
To know the extension port number of an extension:
From SLT extension with a CLI Telephone Set
Dial # 62 and keep the handset down.
The extension will ring and its number shall be displayed on the CLI phone. The display may show a 4-digit number.
In that case the last 3 digits would be the Extension number.
.
CLI (Calling Line Identification)
.
The incomi ng Junctio n call telepho ne numb e r is displayed on the LCD of the CLI phone on which the defined Junctio n cal l
rings. This feature will work with Telep ho nes having CLI feature.
.
CLI Transferable / Internal CLI
.
Whe n
a Junctio n call is transf erred from an extensio n to another extensio n, the external telepho n e numb er is displayed on the
LCD of the CLI phone. When an extensio n calls anothe r extensio n, Extensio n numb e r is displayed on the LCD of the CLI
phone.
.
CLI
– Digits addition
.
Some CLI Telep ho nes canno t display less than 4 digit numb ers . In that case if the PBX extensio n numb ers are less than
4 digits then additional dummy Zeros need to be added by the PBX.
Proced ur e
:
To Enable, Dial #* 0000 + 180 1
# To Disable, Dial #* 0000 +
180 0 #
