Junction Call Hold + Transfer .
.
To transf er a Junctio n line to anothe r extensio n, FLASH and dial the Extensio n numb e r while talking on the junction line.
Now there can be following 4 conditions:
1. When called extensio n lifts, calling extensi o n can convers e and then keep the Hand s et down. The Junctio n call
will then get transf err ed .
2. Called extensio n lifts but
doesn’t want to talk then he may keep the Hands et down.
The call will come back to the transf erri ng extensio n.
3. The called extensi o n is ringing but not lifting the Hands et. Keep the Hands et down.
The call will ring on the called extensio n for 25 secs and if not answered it will ring back on the transf erri ng
extensio n. Now if the Transf erri ng extensio n is busy, the Junctio n call will keep waiting for the Transf erri ng
extensio n to get free.
4. If the called Extensi o n is engag ed , the user will hear 2 tones. Now FLAS H to get back to the Junctio n line. If FLASH
is not done within 10 secs, the Junctio n line will get connec ted. This is the default setting in the PBX.
Alternately the user can chang e to the following mode
:
On dialing an engag ed extensi o n user would get engag ed tone. Duri ng the engag ed tone user can FLASH and
get connected to the Junctio n line.
Program mi ng
:
Dial #* 0000 + 831 #
To shift back to the default setting: Dial #* 0000 + 830 #
.
Junction Dialing Delay Time
.
This is the time after the last two digits dialed by an extensi o n on Junctio n
Line. It is 7 secs in default.
The PBX assumes call maturi ty from after the lapse of this time.
The FLAS H function to hold an Incomi ng Junctio n call starts working after the lapse of this time.
To chang e this delay time, Dial #* 0000 + 03 TT # Where, TT= 01 to 99 secs. Defaul t value = 07 (7 secs)
Junction Line Ring Assignment
.
Junctio n lines incoming ring can be set in the Direct ring modes
:
Direct Ring Mod e
(Calls land on Operato r or defined extensio ns in Simultaneo us Ring mode or Round Robin
Ring mode)
Direct Ring Mode (Simultaneous / Round Robin) Simultaneous Ring
In this mode, incomi ng Junctio n lines ring on one or more Extensio ns .
Incomi ng ring of Junctio n Lines can be program m ed separately for Day and Night modes as described
below: Dial #* 0000 + 3 J M 0 + NN
1
+ NN
2
…..+ N N
1 2
#
J = Junctio n Numb er (1-2)
M = 0 for Day mode/ 1 for Night Mode
NN
1
- NN
12
= The last two digits of Original extensio n numb e rs (01-32 ) where ring is
requi red . (Not the flexible numb er )
Round Robin Ring
In this mode, the incoming Junction call lands on one extension. If that extension is busy or doesn’t respond within few ring s then the
call shifts to another extension.
Program mi ng
:
Dial #* 0000 + 3 J M 1 + N
1
+ N
2
…..+ N
1 2
#
J = Junctio n Numb er (1-2)
M = 0 for Day mode/ 1 for Night Mode
N
1
- N
12
= The last two digits of Original extensio n numb e rs (01-32) where ring is
requi red . (Not the flexible numb er )
When all assig n ed exten sio n s are busy
When the extensio ns assigned for the Junctio n incomi ng call are busy, The assigned extensi o n when busy, will hear a
waiting call beep after every 5 second s. On flashing ext will get connec ted to incomi ng junction call.
Default :
All the Junctio n Lines land on Extensio n numb er 601 and 602 in Simultan eo us Mode.
.
Junction Line - Enable / Disable
.
To Enable Junctio n Line, Dial #* 0000 + 060 J #
To Disable Junctio n Line, Dial #* 0000 + 061 J#
Wher e, J = Junctio n Numb er (1-2)
Note: In default Junctio n Lines are disable.
Junction Grouping
.
Two set of Junctio n groups can be made. One group can be access ed say by dialing 0 and the other group of Junctio n
lines by dialing 8.
