8/7/2018
Rev. 1.0
23
Tower Series PIM Analyzer Remote
Operation User Guide
3.3.9.1.9 Record Reading (Cont.)
Figure 25
– Sector Info Pop-up Window
This will next bring up the Label and Comment window. The user can select the appropriate label
by pressing on that label for the test condition (see
figure 26
), and add a comment (if needed for
further definition) by pressing the bar next to “Comment:” and adding the appropriate text. After
selecting the appropriate label and adding a comment (when required), the user must press the
“OK” button in order to access a window (see
figure 27
) which contains the following choice of
“PIM & R.Loss Record Reading” actions:
1) PIM vs. Time
2) TX Off Reading
3) Cancel
Figure 26
– Label and Comment Pop-up Window
