8/7/2018
Rev. 1.0
17
Tower Series PIM Analyzer Remote
Operation User Guide
3.1.9.1.2 Change Power
The Power Level of the F1 and F2 frequencies can also be changed as on the Tower Series
PiMPro. Pressing the Power Level shown will open up the pop-up window to enter the new
power level for F1 or F2. See
figure 12
below for the location to press the F1 and F2 Power
Level. This will open up the Power Setting pop-up window as shown in
figure 13
.
Note: if the
user selects a power value which is outside of the available range, a pop-up window will appear
similar to the one shown for the frequency range being out of range. However, it will indicate
“Power Out of Range” and “Please Try Again.”
Figure 12
– Location of F1 & F2 Power Level Icons
Figure 13
– TX Power Level Setting Pop-up Window
