Technical instructions
Brio WiL
v1.3EN
5. Description
Brio WiL remotely controls the colour changes of the CCEI LED lights.
The controller is installed in series to the light transformer.
Bluetooth or Wi-Fi devices (smartphone or tablet) allow distant communication with the controller
which instantly transmits the information to the light plugged into it.
6. Installation
6.1. General
Installation of this product involves a hazard of electric shocks. We strongly
recommend you contract a professional installer. Incorrect installation places you
in danger and may irreversibly damage the product and the equipment connected
to it.
For safety and compliance reasons and according to the NEC directives, the Brio
WiL must be installed:
1.
over 3.50m (11.5 ') away (or more if required by local legislation) from the edge
of the pool. This distance includes cable deviations around obstacles. If the Brio
WiL box is installed behind a wall, this will then be the distance required to
complete the loop and connect to the Brio WiL .
2.
or in an underground space immediately next to the swimming pool. In this
case, the space must be accessible via a batch which requires a tool to open it.
The case is resistant to water splashes but must not be installed in a place that may become flooded.
The Brio WiL must be placed on a flat and stable surface and screwed to the wall using the screws
and wall plug supplied.
The Brio WiL must be connected to the secondary output of the light transformer.
The total power of the connected lights must never exceed 120W with a AC power
supply.
The total power of the connected lights must never exceed 60W with a DC power
supply.
ccei.ca
3
