CBS ArcSafe RRS-3 WL, Инструкция по установке и эксплуатации

Страница: 3 / 16

RRS-3 WL
Installation and Operation
1
About the User’s Guide
This user’s guide describes the functions and features of the CBS ArcSafe® Single Application Remote Racking
System (RRS-3). This technical document is intended to act as a simplified reference for users of the equip-
ment; allowing for safe, quick, and efficient use of the RRS-3 features.
D
ANGER
!
This is a red hazard alert warning box; red hazard alert boxes contain information pointing
out potential hazards to personnel and equipment.
A
TTENTION
!
This is a green information box; green information boxes are used to place emphasis on valu-
able information the user will want to pay particular attention to.
D
ANGER
!
Ensure that personnel using this equipment are adequately trained in the operation of the
switchgear they are planning to work with; that they are correctly stationed outside the arc
flash boundary; and that they comply with all applicable Federal, State, Local, and In-house
safety regulations and procedures. Attention should be given to distance, angle, and personal
protective equipment (PPE).
D
ANGER
!
Ensure that switchgear is properly maintained and in good working order before using the
RRS-3 on your switchgear. Contact your local group CBS service provider at www.gcbs.com to
assist in proper care and maintenance for your switchgear.
2616 Sirius Road
Denton, TX 76208
Tel: 877-4-SAFETY
Fax: 940-382-9435
Website: www.CBSArcSafe.com
Email: info@CBSArcSafe.com