Parameters:
Parameter Lock:
The lock allows you to prevent changes to the
parameters and schedule. A padlock icon will flash to indicate that
the system is locked. You have to unlock the system by entering the
correct code in order to change the parameters or schedule. You can
use a different code each time you lock the system. Only the last
code entered will be accepted to unlock. If you forget the code, refer
to the “Reset to Default Parameters” section.
Language:
Lets you to choose the language of the interface.
Mode:
To choose whether the control operates in master mode or in
slave mode. In master mode, the system schedule is used to control
the lighting outputs. In slave mode, it is a 0-10V voltage supplied by
an external source that controls the lighting outputs.
Phase Dimming:
Determines the compatibility of the dimmer with
the installed lights. Some lights work best with one mode or the
other. It's up to you to find out which of the two modes best suits
your lighting.
Chromatic Lighting:
Allows you to enable or disable color control.
Disable color lighting if your fixtures do not support this technology.
How the LUMIX works
