Config
24.0
18.0
LIGHTS CONFIGURATION
The "config" button enables or disables the configuration mode.
In configuration mode, the system goes into manual mode and sets the
light level at 0.1% to allow you to adjust the minimum level.
Press the up and down arrows to adjust the minimum level
for zone 1 on the left and zone 2 on the right.
Press the arrow on the bottom left to return to the previous menu.
Note: A light level of 0.1% is the lowest level that can be achieved.
Below 0.1%, the outputs are completely disabled.
Lights Configuration
- Activate the config button
to set lighting in manual mode
at 0.1%
- Adjust the output levels for
the desired 0.1% lighting
