CBE PC320-CA, Руководство пользователя

Страница: 26 / 44

GB
E
N
G
L
IS
H
GB
26
FUNCTIONS
TANKS
a) .
) .
c)
DRINKING WATER TANK ALARM
WASTE WATER TANK ALARM
SEWAGE WATER TANK ALARM (optional)
DRINKING WATER TANK REFILLING
DIGITAL CLOCK
ALARM CLOCK
AWNING LIGHT AUTOMATIC TURN OFF
TEMPERATURE
BROKEN FUSE ALARM
Drinking water tank with electronic probe: visualization in % (steps of 5%)
b Waste water tank with electronic probe: visualization in % (steps of 5%)
Sewage water tank: three level probe (optional): visualization in “%” (indication 0- 30 -70 -100 %).
Alarm turns on when drinking water level goes below 10% of the tank capacity and automatically turns
off when level exceeds 20%.
Alarm is acoustic (when engine is off), visual (symbol ref. 14 blinking).
Alarm turns on when waste water level exceeds 90% of total capacity and turns off automatically when
level is lower than 80%.
Alarm is acoustic (when engine is off), visual (symbol ref. 15 blinking).
Alarm turns on when recovery water level exceeds 70% of total capacity and turns off automatically
when level is lower than 30%.
Alarm is acoustic (when engine is off), visual (symbol ref. 15 blinking) and the tank battery button ref. 2
gets back-lit in red.
This function is used during the drinking water refilling and indicates the water level during refilling.
To activate this function press the "test tank" button ref.2 for more than 2 seconds, until the "water
refilling" is displayed on the screen.
The control panel beeps in order to warn that tank is getting filled: one short beep at 80%,two short
beep at 90% and a long beep at 100%.
To exit this function press buttons ref. 1 or 2.
To set clock see “SETTING”.
To set and activate/deactivate the alarm clock see “SETTING”.
To reset alarm press any test button; there is no delayed alarm!
An electronic device switches off the awning light when engine is turned on.
- Both int. and ext. temperatures have a sensor, which is placed inside or outside of the vehicle.
- The precision of the temperature value is ± 1°C.
Under each fuse is positioned a red LED.
The lighting of the LED signals that the fuse is broken and it is necessary to replace it with another fuse
with the same value. The alarm is activated only when the control panel is on and the user related to
the fuse is switched on.
NOTE: before repalcing the fuse find the problem that determined the intervention of the protection and
fix it, eventually with the help of specialized technicians.