16
TEMPERATURE
CLOCK
SETUP
- Internal and external temperatures are measured through sensors which are placed inside and
outside of the vehicle.
- The measuring precision is ± 1°C.
When the panel is switched on, the time gets displayed; after every test-function the time gets
displayed again.
In order to set the clock, keep pushing for 2 secs the test button ref. 1 while the time gets displayed.
The hours’ digits start blinking and by pushing the test buttons ref. 2 e ref. 3 they can be modified
By pushing the test button ref. 1 again, it is possible to start setting the minutes’ digits.
By pushing the test button ref. 1 for the third time, the clock setting is confirmed.
To enter the programmation menu turn on the control panel with the switch ref. 5 while keeping
pushed the buttons ref. 2 and 3.
The progammation is sequential: to shift to the next parameter push the button ref. 1.
1. Voltmeter B1. With the buttons ref. 2 and 3 one can modify the displayed value in 0,2V steps
2. Voltmeter B2. With the buttons ref. 2 and 3 one can modify the displayed value in 0,1V steps
3. Amperemeter B2. With the buttons ref. 2 and 3 one can modify the displayed value in 0,5A steps
4. Internal temperature. With the buttons ref. 2 and 3 one can modify the displayed value in 0,5°C
steps
5. External temperature. With the buttons ref. 2 and 3 one can modify the displayed value in 0,5°C
steps
Pushing again the button ref. 1 you exit the programmation menu.
.
FUNCTIONS
TANKS SETTING
NB: do not modify the dip-switches’ position of the picture.
