14
CONTROL PANEL “PC-200T 4t IH”
1)
3)
4)
5)
6)
7)
9)
10)
11)
12)
13)
14)
15)
16)
17)
Test button to check the level in % of the drink and waste water tank
Water pump switch.
Test button to check both internal and external temperature and to set the clock.
Test button to check the voltage of the leisure battery (B2) and car battery (B1), to check charge
and discharge currents of leisure battery and to set the clock.
and to set the clock.
Auxiliary output switch.
Main switch (see minimum voltage control).
Digital display of the clock and of the required test
2)
8)
18)
Lights main switch.
It shows the starting up of the battery parallel when the engine is started.
It shows the car (B1) battery test, the blinking means run-down battery alarm.
It shows the leisure (B2) battery test, the blinking means run-down battery alarm.
It shows the batteries recharging through engine alternator.
It shows the test or alarm of batteries together with the symbols 10 or 11.
It shows the connection to the 230V net.
It shows that the minimal voltage device has switched on.
It shows the drink water tank test, the blinking means empty tank alarm.
It shows the waste water tank test, the blinking means full waste water tank alarm.
It shows the unit of measure: U=Volt, A=Ampere, °C and temperature reference I=internal
temperature, E=external temperature.
CAPTIONS
NOTE:
The watch is supplied from the leisure battery (B2).
Should B2 be disconnected, the watch is able to keep working, without visualization, for about
2 weeks.
P C - 2 0 0
%
G
AUX
MOTOR
CAMPERS
G
%
1
2
3
17
16
15
13
12
11
10
9
8
14
18
6
5
4
7
