CB Tech WATER GUARDIAN MPADC, Руководство пользователя

Страница: 12 / 24

10
Warranty
CB Tech recommends that you not allow water to sit in the system for
extended periods of time without use. If a system is left unused for more than
10 days, it may need to be flushed / disinfected before resuming normal use.
1. Remove the filter cartridge by following the directions in section
Removing The Old Filter Cartridge (Pg 9) .
2. Add 5 to 7 drops of bleach to the inside of the system housing.
3. Reconnect the top of the housing without a replacement filter cartridge
installed.
4. Turn the DWS housing upside down, and then turn on the faucet.
5. Press the right button on the diverter valve to select the filtered water
spout, and allow the system to fill up with the water/bleach solution.
6. Once water begins to flow out of the diverter valve, press the left button
to stop the filtered water spout, and turn off the faucet.
7. Turn the DWS housing right side up, and let the system soak for at least
30 minutes.
8. With the faucet off, select the filtered water spout on the diverter valve
to flush the water/bleach solution out of the system.
9. When the flow of water stops, open, clean, and rinse out the inside of
the system housing.
10. Follow the directions in section Installing The New Filter Cartridge (Pg 9) .
Flushing / Disinfecting The System