Below Sink Kit Components
Included with the Below Sink Kit are the following components:
1. Adapta Valve:
Used to connect the DWS to the cold water line below
the sink. The 1/4” clear tubing connects the Adapta Valve to the 1/4”
inlet fitting on the DWS housing.
2. Faucet:
The faucet installs on top of the sink or counter. The 1/4” blue
tubing connects the faucet to the 1/4” outlet fitting on the DWS housing.
Recommended Installation Tools
NOTE:
Included with each install kit are the fixtures and accessories needed to
install the system. If you determine that your particular plumbing configuration
requires fixtures different from those included with your shipment, please
contact your Dealer.
The following tools are recommended to install your DWS for below-sink use:
1.
Installing the faucet on a ceramic/porcelain sink:
•
3/8” Reversible Electric Drill
•
7/16” High Speed Steel Drill Bit
•
1/2” Masonry Drill Bit
•
Hammer
•
Center Punch
•
8” Adjustable Wrench
•
Pliers/Locking Pliers
2.
Installing the faucet on a stainless steel sink:
•
Everything from list #1, plus 1/8” high speed drill bit
3.
Installing the faucet on a granite countertop:
•
everything from list #1, plus the following:
a.
hammer
b.
center punch
c.
plumbers putty
d.
1/2” diamond drill bit for granite
4.
Installing the Adapta Valve:
•
8” Adjustable wrench
•
Wire cutter or knife
4
