CB Sabbiatrici ASTRO 46000, Руководство пользователя

Страница: 25 / 43

- 24 -
INSPECTION, CLEANING AND STORAGE
The ASTRO Compressed Air line Breathing Helmet has a limited service
life, therefore a regular inspection and replacement programme must be
conducted. Certain parts such as ranges must be replaced frequently.
Al! components of this helmet assembly should be inspected tor damage
or waar and tear betere usa. Replace worn or damaged parts immediately.
USE ONLY APPROVED ASTRO PARTS . Refer to the parts list tor the correct
part numbers.
REMOVING THE CAPE
First remove the cape cover band to reveal the tour
press studs. The cape can then easily be removed
by undoing the tour press studs.
Fig. 10.1
INSPECTING THE HELMET
Having removed the cape, wipe out the inside ot the
helmet with a soft cloth and mild detergent.
Check the inside tor cracks in the shell.
Fig. 10.2
INNER LENS AND GASKET
Make sure the window frame gasket is securely
fitted into the helmet with no cracks or tears in the
seal. Check that the inner lens is correctly fitted into
the gasket. When necessary replace lenses as in Fig
4.1 and 4.2.
Fig. 10.2
WARNING !
DO NOT CLEAN RESPIRATOR WITH VOLATILE CHEMICALS.