Installing the handle and reversing the door of wine cooler
.
1. Install handle to the door frame of the appliance.
Håndtaget følger med i en separate pakke med skruer
og ligger I skabet.
①
Reveal two small holes on the door frame from inner side
by pulling out a bit the door seal
②
Aim the handle to the
holes and insert the screws from inside
③
Screw them up
with screwdriver
④
Put back door seal to cover the screws.
2. Reversing the door
Our wine cooler is delivered with the door opening from left to right. To reverse the
ppening direction:
Open the door at 135 degrees and keep it steady. (Be careful that the door is tall and
heavy)
Unscrew the four screws
②
from the lower hinge
①
[Figure 1].
Pull the door outwards slowly [follow the arrowhead direction in Figure 1] to get off
the lower hinge
①
and continue to pull the door downwards slowly until getting off
from the top right hinge and unscrew the two screws
④
to take off the lower hinge
plate
⑤
from the door [Figure 2].
Screw top right hinge
⑦
off from the cabinet and keep it in the polybag for needs if
you want to change back left opening door in the future. [Figure 3]
EN-7