Taking out shelf (empty loading)
As shown at above figure, the shelf is sitting on the sliding rails.
Slide the shelf
⑤
outwards slowly, when the slot
②
comes beneath the stopper
①
, lift
the shelf
⑥
, and then pull it out from the cavity.
Putting back shelf (empty loading)
Put the shelf
⑤
inwards the cavity, insert it slowly, when the slot
②
goes above the
stopper
①
, drop the shelf
⑤
down, meanwhile make sure the poles
③
on the slider
insert into the small holes
④
under the shelf
⑥
and then push it back to the end.
EN-15