Maintenance
and
cleaning
Cleaning
The below items will damage the surface of wine cooler:
Power
cut
Out
of
service
for
long
time
If the appliance is disconnected or if there is a power cut, you must wait at
least five minutes before re-starting.
Moving
the
appliance
Cut off the power supply and unplug the
appliance.
Remove all bottles from the appliance.
When moving the appliance, do not lean the
appliance over 45°.
Most power cuts could be resolved within a short time. To protect your wines during a
power cut, avoid opening the door as much as possible. During very long power cuts,
take the necessary measures to protect your wine.
Remove all bottles from the appliance, switch off, defrost, clean, dry, and leave the
door open to prevent mould developing within the appliance.
Disconnect the appliance before cleaning.
Clean the appliance with soft cloth or sponge by water.
Do not use organic solvents, alkaline detergent, boiling water, washing powder or
acid liquid etc.
Do not flush the compartment of the appliance.
Clean regularly surfaces that ca n co me in contact with accessible drainage
systems.
EN-11
