5
EN-
Installing handle and reversing the door
1. Install handle to the door frame of the appliance
The handle is delivered in a separated package with screws together inside the carton.
①
Reveal two small holes on the door frame from inner side by pulling out a bit the
door seal
②
Aim the handle to the holes and insert the screws from inside
③
Screw
them up with screwdriver
④
Put back door seal to cover the screws.
2. Reversing the door
Our wine coolers are delivered with the door opening from left to
right. To reverse the opening direction:
Refer to picture 1:
1) Close the door.
2) Remove the short cabinet foot
①
at the bottom right corner,
Unscrew the screws
②
, Take off the right lower door hinge
③
,
Move the door down a short distance, then remove the door and
place it aside.
3) Unscrew the screws
④
, Take off the right upper door hinge
⑤
,
Take off the hinge hole cover
⑥
at the upper left corner, Remove
the cabinet foot
⑦
at the lower left corner.
Picture 1
