Cattron MKU OCU, Руководство пользователя

Страница: 26 / 41

26
MKU OCU
User Manual
11. RF Channel Change Option
To ensure interference-free operation of the radio control system, it may be necessary to change the RF channel
previously assigned by the manufacturer. Changing the RF channel may be necessary due to interference, or in
the event that an RF channel is already in use by another system. RF channels may be changed at the OCU.
Only the legal frequencies for one particular operating band will be available on your device; this will have been
pre-assigned by Cattron.
Note: Ensure that country-specific regulations regarding frequency range and channel are observed when
changing the RF channel.
11.1 Working Principle
Refering to Figure 12, when the OCU operating mode is changed to Programming Mode, the RF channel is
selected using the top row of pushbuttons. Either a higher or lower RF channel can be selected by selecting the
‘UP’ or ‘DOWN’ pushbuttons. This can be done in individual steps when using the first step of the pushbutton, or
in fast step when using the second step of the pushbutton. Each RF channel has been assigned a specific color
code and the respective RF channels are displayed by the four function LEDs located on either side of the
‘STATUS’ LED.
Figure 12: Channel Selection Mode Pushbuttons