Cattara G3554OD, Руководство пользователя

Страница: 5 / 24

Art. No.
13 060
-5-
e
Garden kitchen & Gas Grill VICENZA
ONLY USE THIS BARBECUE OUTDOORS.
BEFORE USE CHECK FOR LEAKS
Never check for leaks with a naked flame, always use a
soapy water solution
CHECK FOR LEAKS
ź
Make 2-3 ounces of leak detecting solution by mixing 1/4
washing up liquid with 3/4 water.
ź
Ensure the control valve is OFF.
ź
Connect the regulator to the cylinder and ON/OFF valve to
the burner, ensure the connections are secure then turn ON
the gas.
ź
Brush the soapy solution onto the hose and all joints. If
bubbles appear you have a leak, which must be rectified befo-
re use.
ź
Retest after fixing the fault.
ź
Turn OFF the gas at the cylinder after testing.
ź
If leakage is detected and cannot be rectified, do not attempt
to repair leakage but consult your gas dealer.
Lighting instructions for main burner
ź
Open the lid and make sure that all burners are in the OFF
position
ź
Connect the regulator to the gas bottle. Turn the gas supply
to ON position on the regulator. Use soapy water to check if
there is any gas leakage between the Bottle and the regula-
tor.
ź
Push down the control knob and turn it anti-clockwise to posi-
tion to light the burner.
ź
If the burner fails to ignite, turn the control knob off (clockwi-
se) and also turn the cylinder valve off. Wait 5 minutes and
repeat previous step.
ź
Adjust the heat by turning the knob to the High/Low position.
ź
To turn off the barbecue, turn the cylinder valve or regulator
switch to the “OFF” position and then turn the control knob on
the appliance clockwise to the “OFF” position.
Warning: If any burner fails to ignite, turn the control knob off
(clockwise) and also turn the cylinder valve off. Wait five minu-
tes before attempting to relight.
Before cooking for the first time, operate the barbecue for about
15 minutes with the lid closed and the gas turned on HIGH. This
will ‘heat clean’ the internal parts and dissipate odour from the
painted finish.
Lighting instructions for side burner
ź
Open the lid.
ź
Push down the control knob and turn it anti-clockwise to posi-
tion to light the burner.
ź
If the burner is not lit within 5 seconds, turn the knob to OFF
position, and repeat previous step.
ź
If the burner fails to ignite, turn the control knob off (clockwi-
se) and also turn the cylinder valve off. Wait 5 minutes and
repeat previous step.
ź
To turn the barbecue “OFF”, turn the cylinder valve or regula-
tor switch to the “OFF” position and then turn the control knob
on the appliance clockwise to the “OFF” position.
Warning: If any burner fails to ignite, turn the control knob to off
position (clockwise) and also turn the cylinder valve off. Wait for
five minutes before attempting to light the barbecue again.
CLEANING & MAINTENANCE
General Warning
ź
Before cleaning, wait until the gas barbecue has cool down
sufficiently.
ź
Before cleaning, remove the gas cylinder.
ź
Do not use any flammable detergents.
ź
Do not use wire brush or other abrasive utensils for cleaning.
ź
Do not use any oven cleaners. Oven cleaner attacks painted
surface.
ź
Clean the barbecue after each use.
Exterior surface
ź
Use mild detergents, caustic soda and hot water.
ź
Mild abrasive agents can be used for stubborn stains.
ź
Following this, rinse thoroughly with water.
Interior surface
Does the inner surface of the grill lid looks as paint may flake?
There is burnt-on grease which is flaking.
ź
Clean the surface thoroughly with highly concentrated, hot
soap suds.
ź
Rinse thoroughly with water and allow the lid to dry.
Interior surface of the barbecue bottom
ź
Remove residue with a brush or a scraper.
ź
Using soap suds and a sponge, finish by washing the surfa-
ce.
ź
Rinse thoroughly with water and allow the surface to dry.
Cooking grid & Warming Rack
ź
Use mild soap suds.
ź
Mild abrasive agents can be used for stubborn stains.
ź
Following this, rinse thoroughly with water.
Clean the burner
ź
Turn the gas OFF at the control knob and disconnect the
cylinder.
ź
Remove cooling grate.
ź
Clean the burner with a soft brush or blow clean with com-
pressed air and wipe with a cloth.
ź
Clean any clogged ports with a pipe cleaner or stiff wire (such
as an opened paper clip).
ź
Inspect burner for any damage (cracks or holes). If damage
is found, replace with a new burner. Reinstall the burner,
check to ensure that the Gas valve orifices are correctly posi-
tioned and secured inside the burner inlet (venturi).
Store the gas barbecue
ź
Before storage, please ensure the barbecue is clean and dry.
ź
Store the barbecue in a dust-free, dry room.
ź
Always use a cover to protect the barbecue to avoid rust.
SERVICING
Your gas barbecue should be serviced annually by a compe-
tent registered person.