Cattani ASPI-JET 6 y, Руководство оператора

Страница: 15 / 24

13
15
cod: ed. 10-2021
EN
G
LI
SH
• After every patient, replace or disinfect the
external hose (preferably with Eco-Jet 1).
• After every surgical operation or any long
operation: rinse the appliance by aspirating hot
water (50 °C).
• At noon, before lunch time, clean the system with
Puli-Jet plus new or Puli-Jet plus 2.0 (sanitizing at
4% - disinfecting at 8%).
• After each working day: clean filters, clean plant
with disinfecting Puli-Jet plus new or Puli-Jet plus
2.0 and hot water.
• Once every fortnight clean the canister, draining
valve and probes; lubricate OR and sliding closures
of terminals with spray silicon.
MAIN CLEANING AND MAINTENANCE OPERATIONS
MAIN CLEANING AND MAINTENANCE
OPERATIONS
NOTICE
MAINTENANCE OPERATIONS MEANT FOR
ENGINEERS
NOTICE
Prior to starting any servicing operation on
appliances that have been used, clean with Puli-
Jet plus new or Puli-Jet plus 2.0 a few times as
explained in the maintenance section.
Use disposable GLOVES (fig. B3), GOGGLES, MASK
and OVERALL.
MAINTENANCE OPERATIONS MEANT FOR ENGINEERS
Further to the maintenance operations listed so far,
for Aspi-Jet 8 and 9
γ
you also need to check the
water filter 13 (Fig. I).
Periodically: replace terminals and hose outside the
unit. The engineer shall check, siphons and outlets,
all internal piping, plastic and rubber subject
to ageing. Periodically check the capacity of the
capacitor with a capacitance meter (max. -5%) and
replace it if necessary.
Before servicing any used equipment, carry out
some washing operations with Puli-Jet plus new
with anti-scale agent or Puli-Jet plus 2.0.
Disconnect electric supply and padlock mains switch
if provided.
• Electrical shock risk: even 230 V power can be
lethal.
• Biological danger, danger of infections from
epidemic diseases.
• Compulsory direction of flow and rotation sense.
Fig. I