NVP-903 User Manual
6
Tips:
SSID of NVP-903 internal hotspot (AP) will be displayed in the E-Ink of device front panel.
3 Web Control [Encoder Mode]
3.1 Log In
NVP-903 supports PC web control via Ethernet port, it also supports PC/Smartphone/Pad wireless web
control via NVP-903 internal hotspot.
3.1.1 Log in via Ethernet
1)
Prepare a computer with Ethernet port and Internet web browser.
2)
Connect your PC to the NVP-903 ETH port via Ethernet.
3)
Configure computer IP address, make sure that NVP-903 and the computer IP are in the same
network segment
4)
Input the device IP address in the web browser, it will displays the Log in page, as follows:
(Default IP Address:
202.0.0.138
)
Figure3.1 Log in
5)
Type in the Account and Password to login.
(
Equipment factory, the account password is empty, add account after the account management page to
open the web page to enter account password options.
)
3.1.2 Log in via Wi-Fi
1)
Prepare a PC/Pad/Smartphone with Wi-Fi function and Internet web browser.
2)
Search Wi-Fi SSID of NVP-903 internal hotspot(AP) and connect your PC/Pad/Smartphone to it.
(Default AP Password:
87654321)
3)
Input the device IP address in the web browser, it will displays the Log in page, as in
Figure 3.1
4)
Type in the Account and Password to login.
(Default Account:
admin
; Default Password:
admin)
