NVP-903 User Manual
24
4.2 Configuration
Click
Configuration
in main menu to enter the basic setting page, as follows:
Figure4.3 Configuration
In Configuration page, users can configure basic settings of transport protocol and view the decoding
status.
Click to save the configuration.
4.2.1 Protocol
NVP-903 decoder mode support 1 channel STPS over IP decoding with HDMI output.
1)
UDP Unicast
Figure4.4 UDP Unicast
Protocol:
Set Protocol to
UDP
Workmode:
Set Workmode to
Unicast
Port:
Transport port for UDP Unicast transmission. Range: 1024~65535
Enable:
Enable stream receiving.
ON:
Enable the receiving;
OFF:
Disable the receiving
