NVP-903 User Manual
4
Tips:
If Data indicators keep red when you have plugged in the video source, check video/audio input
settings via web control. Make sure the video/audio type in input setting and the video source type to
be the same.
2 Panel Design
2.1 Front Panel
Figure2.1 NVP-903 Front Panel
NVP-903 Front Panel consists of an E Ink screen and 3 indicators: Power, Data and Stream.
E Ink:
Displays device basic info. The info in E Ink will not be vanished after powered down.
Work Mode:
Current device work mode: NVP-903-E (Encoder Mode) or NVP-903-D (Decoder
Mode)
SSID:
Device serial number / SSID of NVP-903 internal hot-spot(AP)
Password:
Password of NVP-903 internal hot-spot(AP)
Stream IP:
Device IP address for streaming and web control
Indicators:
Displays current running status
Power: [Blue]
Device is powered up now
Data: [Green]
Device recognizes the input source successfully.
[Red]
Device does not recognize
the input source now
Stream: [Green]
Device is connected to target server/decoder and pushing/pulling stream to it;
[Red]
Device is not pushing/pulling stream to target server/decoder.
