Web Control
Receive R2TP
GE
Select stream port for receiving: GE1/GE2 or GE3/GE4
Mode
Set the work mode: RX (Receiver)
Protocol
Select transport protocol: R2TP
IP
Input the IP address of Local RX
Port
Input the R2TP port of RX. Make sure the R2TP port of TX and RX to be the
same
Description
Describe the stream by custom to identify it
Buffer Time
Set buffer time of RX, which refer to network health and user’s need.
Value range: 125ms, 250ms, 500ms, 750ms, 1000ms, 2000ms, 4000ms.
Receive R2TP-S
GE
Select stream port for receiving: GE1/GE2/GE3/GE4
Mode
Set the work mode: RX (Receiver)
Protocol
Select transport protocol: R2TP-S
IP
Input the IP address of target R2TP Relay Server(RRS)
Port
Input the R2TP-S port of RX. Make sure the R2TP-S port of TX, RX, and
RRS to be the same
Description
Describe the stream by custom to identify it
Buffer Time
Set buffer time of RX, which refer to network health and user’s need.
Value range: 125ms, 250ms, 500ms, 750ms, 1000ms, 2000ms, 4000ms.
After the transport stream is configured, click on and click to enable the transmitting.
Click off and click to stop the transmitting. Click to refresh current page.
Diagram on the right displays the real-time receiving bit rate of RX, click the diagram to view the
detailed status statistics, as follows:
