Catler ES 8011 SE, Инструкция по эксплуатации, Страница: 31 / 44

31
CARE & CLEANING
CLEANING THE STEAM WAND
Run steam to clear milk
from wand after texturing. Wipe steam wand after
each use. Clean hole with pin. Remove tip. Soak tip overnight then
re-attach.
• The steam wand should always be
cleaned after texturing milk.
• Wipe the steam wand with a damp cloth,
and then with the steam wand directed
back into the drip tray, briefl y set the
steam dial to the STEAM position. This
will clear any remaining milk from inside
the steam wand.
• Ensure the steam dial is in the I position.
Press the POWER button to Off and allow
the machine to cool.
• If the steam wand remains blocked, use
the pin on the cleaning tool to clear the
opening.
• If the steam wand continues to be
blocked, the tip of the steam wand can
be removed by using the spanner in the
middle of the cleaning tool.
• Unscrew the tip with the cleaning tool.
• Soak the tip in hot water before using
the pin on the cleaning tool to unblock.
Replace the tip back onto the steam
wand and secure with the cleaning tool.