Catler ES 8011 SE, Инструкция по эксплуатации, Страница: 28 / 44

28
CARE & CLEANING
CARE & CLEANING
WARNING
ENSURE THE APPLIANCE IS SWITCHED OFF, COOLED DOWN AND
UNPLUGGED FROM THE POWER OUTLET BEFORE CLEANING. DO NOT USE
PETROL, SOLVENTS, ALCALIC AGENTS OR ANY OTHER SIMILAR LIQUIDS
FOR CLEANING. FOLLOW THE INSTRUCTIONS STATED IN THIS CHAPTER.
INSLATALLING/REPLACING THE FILTER IN THE WATER TANK
Soak the water fi lter for
5 minutes. Rinse fi lter and mesh. Assemble.
REPLACEMENT DUE
Set date 2 months ahead. Install fi lter in water tank. Insert and lock the
water tank.
The water fi lter provided helps to prevent
scale build up which over time can aff ect the
performance of your machine, potentially
causing blockages and heating problems.
Replacing the water fi lter every two months
will reduce the mineral build up in the
machine.
If you live in a hard water area, we
recommend you change the water fi lter more
frequently.
Replacing the water fi lter
• Remove the fi lter from the plastic bag,
and soak in a cup of water for 5 minutes.
• Rinse the fi lter under cold running water
for 5 seconds.
• Wash the stainless steel mesh in the
plastic fi lter compartment with water and
assemble.
• Set the date dial 2 months ahead.
• To install, push down to lock into place.
The water fi lter can be removed from
the water tank during operation if not
required.
Portafi lter cleaning
Periodically run water through the machine
with the portafi lter in place, but without
any ground coff ee, to rinse out any residual
coff ee particles.
NOTE:
To purchase water fi lters contact your
dealer.