Cathode Corner SCTV, Инструкция по сборке и эксплуатации

Страница: 29 / 34

SCTV Clock Assembly Manual 1/24/22 29
Flip the piece over and repeat with another piece of tape.
Use your fingernail to scrape of any small burnt pieces of paper. Goo Gone may be used with a soft
cloth to remove any remaining sticky bits.
Peel the paper off the cap, which is the small square piece with writing on it. Again, use your fingernail
to remove the small bits of paper from the text areas.
Find the top of the cup piece by feeling the edges for the smoother edge. Press a square nut into each of
the five slots on the cup from the top side. Center each nut in the slot. If a nut falls out, save it for
installation after the cup is installed.
Fold the cup around the cap, with the writing on the cap facing out. Hold the cup in this position, you
will find that it takes several fingers to do this. Wrap a piece of painter’s tape around the two ends of the
cup so that the tape holds the cup around the cap.