Cathode Corner SCTV, Инструкция по сборке и эксплуатации

Страница: 25 / 34

SCTV Clock Assembly Manual 1/24/22 25
Felt Installation
The felt strip must be placed around the CRT, just behind the face, to make it fit snugly in the case.
Unpack the CRT from its box. HANDLE IT CAREFULLY! It is big and full of vacuum, so it is
dangerous if dropped or broken. Set it back in its box when it is not being actively worked on.
Peel one inch of backing paper from one end of the felt strip. Take care to only peel the white paper, and
not the clear adhesive, from the felt. This may require tweezers.
Stick the end of the felt to edge of the CRT just behind the face, in a direction that will allow you to
easily rotate the CRT while pressing the felt onto it.
Peel the backing paper from the felt as you go, guiding the felt strip into place with two fingers as it
makes contact with the CRT. If it starts going on crooked, peel it up and straighten it out as you go.
When you have completed the circle, cut the felt strip to length so that the ends nearly meet but do not
overlap.