4
EN
Operation
1. Connect to the mains power supply and turn the power switch On (I).
2. Drop ice cubes into the ice chute to start crushing. (Note: Suitable for cubes up to 2x2x2 cm)
WARNING: The blades of the crusher are self feeding! Do not attempt to push cubes into
blades with hand or instrument.
3. After use, turn the power switch Off (O) and disconnect from power supply.
It is recommended that the unit is allowed to cool after each cycle. For an operation cycle
of 3 minutes the recommended cool down time is 10 minutes.
Ice blockage
1. Should a large cube get blocked in the crushing unit, set the power switch to the OFF position (O)
and unplug the unit.
2. Pour warm water through the ice chute to melt ice blockage.
3. Re-plug and re-start the appliance.
Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Pour warm water through the ice chute to rinse the appliance thoroughly.
• Wipe the appliance housing with a damp cloth. Dry well afterwards.
Troubleshooting
A qualified technician should carry out repairs if required.
Fault
Probable Cause
Solution
The unit is not working Unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug or lead is damaged
Replace plug or lead
Fuse in the plug has blown
Replace the fuse
Mains power supply fault
Check mains power supply
Technical Specifications
Model
Voltage
Power
Current
Ice container
capacity
Weight
Dimensions
H x W x D mm
Largest ice
cube
CT057
220-240V~
50/60Hz
60-80W
1A
12 Cup
3.71kg
460 x 220 x 170
2 x 2 x 2 cm
Due to our continuing program of research and development, the specifications herein are subject to
change without notice.
CT057_ML_A5_v4_20220905.indb 4
CT057_ML_A5_v4_20220905.indb 4
2022/9/5 18:00
2022/9/5 18:00
