background image

Catalyst Enterprises Inc.

Appendix B

94

SetTableHeader

SetTableHeader(

string

);

SetTableHeader(

OptionalFieldId

);

Remark

This statement sets the table header of interpreted data. The viewer will show the

string 

in the header of the table that shows the interpretation of data. If user uses the

SetTableHeader(

OptionalFieldId

)

 form of this statement, then the option string of

the specified 

OptionalFieldId 

will be set as table header.

Parameter

String

Specifies the string that will show in the header of the table.

OptionalFieldId

Specifies the FieldId of an optional field.

Example

OpCode = AddField (0, 8, “Op Code”, “Op Code”, 
“Op Code”);

If (ValueOf (OpCode) = 0x01) then      /* Read 
command */
{

SetTableHeader (“Read”);
/*  Remained decoding */

}

SetFieldTableHeader

SetFieldTableHeader(

FieldId, string

);

SetFieldTableHeader(

FieldId, OptionalFieldId

);

Remark

This statement sets the table header if the user has specified that sub fields of a field
are shown as separate table. (See SubFieldOf statement).  

If the user uses the

 

SetFieldTableHeader(

FieldId, string

)

  form  of  this

statement, the specified 

string

 

will be set in the table header, and if user use

SetFieldTableHeader(

FieldId, OptionalFieldId

)

 form of this statement, the

option string of the specified 

OptionalFieldId 

will be set in the table header.

For more information about optional field please see  See “Define Option
Block” on page 87..

Parameters

FieldId 

The field Id that was defined by AddField

String

 

The string that user wants to show in the header of the table.

OptionalFieldId

Specifies FieldId of an optional field.

Содержание AirCom UWB Analyzer















































































































Отзывы: