Cata TDG 3002 BK, Инструкции по установке, использованию и обслуживанию

Страница: 19 / 83

ing displays are dimmed. if the cooking zone is “hot”, “H” will be
alternately displayed.
Press the PLUS (3) or MINUS (2) button to select a setting and the
zone will begin to heat up.
Once the cooking zone has been selected, the setting can be
selected. The setting begins at level 5, change the setting by
pressing the PLUS (3) or MINUS (2) to the level you want to use.
When setting “0” or “9” is reached, there will be no further setting
changed. The setting can only be changed by pressing the MINUS
(2) or PLUS (3) button again.
Switching a cooking zone off
Select the zone to be switched off using the corresponding but-
ton (5). The display (6) of the zone selected flashes. Press the
PLUS (3) and MINUS (2) buttons at the same time and the setting
level of the zone is changed to 0. Alterna-tively, the MINUS button
(2) can be used to reduce the setting level to 0.
If a cooking zone is “hot”, “H” will be intermittently dis-played.
Switching all cooking zones off
Press the ON/OFF (1) button to immediately switch off all zones
at any time. In standby mode, an “H“ is displayed in all cooking
zones that are “hot“. The remaining displays will be switched off.
Setting level
The cooking zone can be set to 9 levels that are indicated by the
numbers “1“ to “9“ on the seven-segment LED displays (6).
Residual heat indicator
This informs the user that the glass is at a dangerous tem-peratu-
re in the event of touching the area located around the cooking
zone. The temperature is determined by a mathematical model
and any residual heat is indicat-ed by a “H” on the corresponding
7-segment display.
Heating and cooling are calculated based on:
•
The selected setting level (between “0“ and “9“)
•
The ON/OFF time.
After switching off the cooking zone, the corresponding display
will indicate “H” until the temperature in the zone has dropped
below the critical level (
≤
60°C).
Automatic off function (operating time limitation)
In terms of the setting level, if no operation occurs each cooking
zone switches off after an established maximum time.
Each operation in the cooking zone condition (using the PLUS
(3) and MINUS (2) or dual zone) restarts the maximum operating
time of the zone by resetting it to its initial value.
Button lock (child safety feature)
• Child safety feature:
Button lock:
To activate the child safety feature after having switched
on the Touch control, pressbutton (8) for 1 second.
A “Lo” standing for LOCKED (child safety feature preventing
unin-tended switch on) will be indicated on timer displays.
The electronic control remains locked until it unlocked by the
user, even if it has been switched off and back on meanwhile.
Not even touch control resetting (after a voltage drop) will inter-
rupt the button lock.
Cancelling the button lock:
After switching the touch control on, the child safety feature can
be disabled. Press and hold the button (8) for 3 seconds, the but-
ton lock will be cancelled.
Control of multiple circuits
Hobs without double or triple circuit, see Fig. 2A
Hob with double zone. (Fig. 2B)
When a dual cooking zone is activated, the two circuits are
switched on at the same time. Activation of the external circuit is
indicated by a pilot light (6) “=”. . If only the internal circuit is to be
switched on, the external circuit can be switched on/off using the
dual circuit button (4).
Hob with triple zone. (Fig. 2C) / Hob with double and triple zone.
(Fig. 2D)
When a dual / triple cooking zone is activated, the 3 cir-cuits are
switched on at the same time. The activation / deactivation of each
circuit is done with button 4 and it is indicated by LED to alterna-
tively display “ ≡ ” and power level.
Sound signal (buzzer)
The following activities are indicated by a buzzer during use:
•
Normal button pressing by a short sound.
Timer function (optional)
The timer function is realized in two versions:
Stand-alone timer 1.. 99 min:
sound signal when the time is over
(= minute minder). .
Cooking zone timer 1..99 min:
sound signal when the time is
over and the zone will be shut down, four cooking zones can be
programmed independently.
Timer as minute minder (stand-alone):
If the control is ON and no cooking zone selected, the standalone-
timer can be used by pressing button (9).
Adjustment range (0-99min), it can be set in 1-minute steps with
MINUS (2) and PLUS (3). Press button (9) to set minutes, after that
press button (9) again to set dozens of minutes.
Adjustment can be made by tip-operation (with sound signal)
After the timer is set the time runs down according to the ad-
justment. When the time is over there is a sound signal and the
timer display blinks.
The sound signal will be stopped
automatically after 10 sounds Then the blinking of the timer dis-
play stops and the display extinguishes.
Switching-OFF/changing the timer
The timer can be changed or switched-off anytime by simultaneously
operating MINUS (2) and PLUS (3) keys. (with sound signal). The timer
will be switched off by counting down to “0” with the minus-key.