029
INSTRUCTIONS FOR FITTING
(continued)
Open the door of the appliance
and of the furniture about 90°.
Insert the bracket (Hb) into the
runner (Ha). Hold appliance and
furniture doors together and mark
the position of the holes as shown
in the drawing.
Remove the bracket and make
holes 8 mm from the outer edge of
the door using a drill fitted with a 2
mm drill bit.
Put the bracket back on the runner
and fix it with the 8 screws
provided.
Use the set of oval holes to align
the door of the furniture if
necessary.
At the end, it is necessary to check
that the door of the appliance can
shut perfectly.
Click the cover (Hd) onto the
runner (Hb).
If the appliance is fixed laterally to
the furniture column, unscrew the
screws of the brackets (D) and
move them as in the drawing.
Fix them again. Put on the cover
(E).
1/ INSTALLING YOUR APPLIANCE
EN