CASTOR Static Oven, Инструкция по эксплуатации и установке

Страница: 8 / 22

21
GB
END-OF-COOKING TIMER
The end-of-cooking timer, adjustable from 0 to 120 minutes, is used to programm the
cooking end and to switch off the oven. To use it, rotate first the knob clockwise by one
click onto position ; then, wind up the ringer by further rotating the knob by a nearly
complete rotation; finally, turning it backwards, set the desired time. Once the preset time
has elapsed, the acoustic signal starts up and the oven is automatically switched off. To
switch the oven to the manual operation, thus excluding the timer, turn the knob to its ini-
tial position by rotating it counterclockwise by one click until the symbol of the con-
trol board matches the reference on the knob.
TIMER
To programme the timer, press and turn the knob leftwards until it
coincides with the hour. (If the knob is turned rightwards, a safety
mechanism protects the elements of the timer).
COOKING TIMER
To programme the cooking time (adjustable from 0 to 180 minutes),
turn the knob anticlockwise, but without exerting a pressure and
until the disc’s window, or the hand, coincides with the requested
cooking time. The oven is disconnected and the continuous bell is
activated when the preset time is over. To stop the bell, turn the
knob leftwards without exerting a pressure, until the port or the hand
coincides with symbol
ELECTROMECHANICAL PROGRAMMER
It is used to programme the oven start and stop. The program-
mer is fitted with an electric timer for displaying the hour.
displays the programmer controls: use knobs A, B, and adju-
sting ring C, to carry out the necessary adjustments, such as:
Knob A:
Turn this knob clockwise to correct the time of the timer. (This
is done when installing the appliance, when the current is cut out, for controlling both
advance and lag, and so on).
Knob B:
Press and turn this knob clockwise to preset the cooking start time on dial F.
Adjusting ring C:
Turn this ring clockwise to preset the following:
• cooking time (210 minutes max)
• manual operation of the oven (position )
• acoustic signal cut off (position )
These signals appear on dial E
INSTRUCTIONS FOR USE
053 ed Statico4/2000 21-11-02 20:29 Pagina 21