Connecting to the Internet
Confirm that the physical connection between the Cable modem and
CBW500 is OK, and the link status LEDs on both CBW500 and Modem
are lighted.
Confirm that the connection between the Cable modem and its interface is
OK.
Ensure that you have entered the correct information into the CBW500
configuration screen as required by your ISP.
Forgotten Password
You need to reset the CBW500 to its factory default settings if you do not
know or have forgotten the logging password. And all your configuration
changes will be lost if you reset the CBW500. Your may need to reinstall
the USB driver before you can perform a connection to Internet if you
connect the CBW500 to PC via USB interface. Please refer to chapter 4
for reset description.
Wireless Network Connection
Ensure that you have a 802.11b/g wireless adapter for each wireless
computer, and is correctly installed and configured.
Verify that your wireless computers are configured to work in
Infrastructure mode and not AdHoc mode. The CBW500 is designed to
operate in Infrastructure mode. AdHoc mode is not supported by the
CBW500.
Check the status of the WLAN LED, it should be lit if wireless connection
is performed.
Ensure that the wireless clients are using the same SSID as the CBW500.
The SSID is case-sensitive.
Ensure that you are using the same level of security on all of your wireless
computers (Off, 64 or 128 bit)
and all devices are using the same keys
and the same order of keys.
Ensure that you have the wireless computers enabled in the list of allowed
MAC addresses if you are using Wireless Access control feature.
34