Check for parts online at
www.castlestoves.com
or call 800-345-6007 M-F 8-5 CST
Operator's Manual
HPS09 Pellet Stove
Check for parts online at
www.castlestoves.com
or call 800-345-6007 M-F 8-5 CST
10
sPecifications
model number
hPs09
BTU/hour input (1)
40,000 max
Heating Capacity (2)
1,700 Sq. Ft.
Electrical Rating (3)
110-120 volts, 4.5 Amp,
60 Hz
Power Consumption
520 Watts ignition,
200 Watts operating
Fuel Storage Capacity
40 lbs.
Flue Size (4)
3 in.
Width
24.4 in.
Height
32.1 in.
depth
23.6 in.
Weight
287 lbs.
(1) Heat output will vary, depending on the brand, type
and quality of fuel and the moisture content. Consult
your dealer for best results.
(2) Based on post 1982 home construction, requiring 35
BTU/Hr. per Sq. Ft.
(3) Install per NFPA 70 and follow all state and local
codes, contact licensed electrical contractor for
assistance.
(4) Install per NFPA 211 and follow all state and local
codes, contact licensed installers for assistance.
Listing label:
Tested to the following standards: UL1482, ASTM E1509,
ULC/ORD-C1482-M1990
glass sPecifications
This stove is equipped with 5 mm ceramic glass. Replace
glass only with Castle Pellet Stoves ceramic glass. Call
your Servicing Dealer or Castle Stoves at 1-800-345-6007
for replacement parts.
unPacking
Your Castle HPS09 will come fully assembled. Remove
all packing material and tape from the inside of the
firebox. Remove any tape on the outside of the glass.
Open the hopper, remove all packing material and
power cord.
NOTE: MakE surE ThE hOppEr is frEE Of all
fOrEiGN MaTTEr bEfOrE filliNG wiTh fuEl.
fOrEiGN MaTErial will causE auGEr jaMs
aNd will vOid sTOvE warraNTy.
Caution
this installation must conform with
local codes. in the absence of local
codes you must comPly with astm
e1509, (um) 84-hud, ulc/ord-c-1482.
castle Pellet stoves, manufacturer of
this aPPliance, reserves the right to
alter its Products and/or their sPeci-
fications without notice.
