1.1
USING THE SYSTEM - SUMMARY
For full details, refer to Section 2.
SETTING THE SYSTEM
SIMPLE SETTING THE SYSTEM
(if enabled in programming)
UNSETTING THE SYSTEM
SILENCING AN ALARM
USING THE 'CHIME' FACILITY
Enter your four digit code (eg 1234) and * to set the system to 'PART' set 'B'
Enter your four digit code (eg 1234) and # to set the system to 'FULL' on
OR use the keyswitch (if fitted) to select 'FULL' or 'PART B' on.
Enter B and # (6 and # if no 'B' key on keypad) to set the system to 'PART'
set 'B'
Enter C and # (9 and # if no 'C' key on keypad) to set the system to 'PART'
set 'C'
Enter D and # (# twice if no 'D' key on keypad) to set the system to 'FULL'
Enter your four digit code (eg 1234) followed by #
OR Switch key to 'OFF'
Enter your four digit code (eg 1234) followed by #
OR switch key to 'OFF'
Display will indicate cause of alarm
Note and investigate this cause, calling your alarm company if appropriate.
Press # (or turn key to 'FULL' and back to 'OFF' ) to return the system to
normal 'day' mode
Switch the 'Chime' on or off by pressing A and # (3 and # if no 'A' key on
keypad)
1700 Alarm System (7S) Operating Instructions
January 2000
Page 3