Castelmonte HELIOS PELLET, Руководство по эксплуатации и обслуживанию

Страница: 27 / 40

To activate the selection mode Chrono is necessary to press the Chrono key (8) for at least 4
seconds. The clock of the remote control display (Area 3) remains on, and the program
selected is flashing instead of the current. With the “+” and”-“(9and12 keys)
You move cyclically between programs P01 - P10, P99 and OFF. Once you have chosen the
program you press the OK key (10) to save and exit (with the exception of P99, see below).
The digits showing the program disappear and give place to the current time.
If, none of the 10 pre-set weekly programs meets your personal heating requirements, you
can build a personalized weekly program. Selecting P99 and pressing the OK key (10) the
symbol P99 stops flashing and stays on and the symbol of all the days of the week are
permanently on. With the “+”and”-“keys (9 and 12keys) scroll through the days of the
week, the selected date will appear with the flashing symbols (the others will remain
permanently on). To set the daily schedule of the day chosen (with the flashing), press the
OK key (10 key), the symbols of the remaining days will turn off and the symbol of the
scheduled day will be displayed on steady and the daily program on flash. At this point,
using the 9 and 12 keys cycles through preset daily programs (identified with numbers from
00 to 50), and pressing the OK key ( 10key) will save the setting day: the symbol of the day
begins to flash, the daily profile set will again be lit and the remaining days will reappear on
permanently. Once you have saved and exited the programming mode, activating P99,
around the symbols of the days set by a custom program, will remain steady on its square.
At any time, pressing the CRONO key (8key) you can exit the relative mode without
saving, while maintaining all the data saved before
If you do not press one of the keys related to the Chrono mode for at least 60 seconds you
exit the program without saving, you keep only the data saved before.
Note: The first setting the custom program show 00 for all days, corresponding to off.
The Chrono mode is active only when the remote control is turned on; turning off the remote
control ,while the Chrono is active leads to the disabling of the operation in Chrono mode,
even if not erase the program set.
Note: At Chrono on, the times require that the stove is on, appears in the center of the remote
control, a small ON symbol next to the clock
NOTE: The features Chrono, Sleep and Ecostop must be inserted just in exclusive manner.
Therefore, it is recommended to use only one feature at a time, so it does not create any
inconsistencies or irregular execution