Castaway Boats CCBL1, Руководство пользователя, Страница: 19 / 32

15
Castaway Boats ~ Box 39, Farmington, BC V0C 1N0 ~ Toll free 1-877-789-9008
~ Outdoor fun. Manufactured for everyone ~
Take care to minimize spills while refueling.
Fill tanks to less than their capacity. Clean
fuel spills with dry rags and dispose of them
properly once on shore.
Waste Disposal
Don’t leave it behind! Take your garbage
with you when you go. Bag all refuse to be
disposed of properly when on shore.
Noise Pollution
Many areas have regulations which restrict
noise levels. Some boating takes place in
areas with residences near the water. Be
courteous; minimize the noise in close
proximity to residential areas.
Wash/Wake
The wash and wake of your vessel can
have devastating effect on swimmers,
divers, other vessels in the water, and to
personal property that may be moored at
the shore. Boat operators are required to be
attentive in identifying the potential for
danger caused by the wake and wash of
their vessel. Reduce speeds as necessary
to avoid unfortunate incidents.
CCBL1 USAGE
Maximum Capacities are affixed to the
vessel indicating the maximum load and
horsepower ratings for BOTH the Full and
Half Boat configurations. For the user’s
reference and safety, a pictorial diagram of
each configuration is placed with each
rating on the boat. Take notice to avoid
exceeding manufacturer’s maximum
capacities. Failure to adhere to these
warnings could cause damage to property,
personal injury, or death.
CCBL1 Half Boat Configuration
CCBL1 Half Boat configuration lists its
maximum capacities on the top portion of
the capacity label, which is affixed to the
inner cockpit of the vessel in its starboard
aft (Right Rear) section.
The Half Boat configuration is affixed with
two sets of metal plates at the bow and
stern of the vessel. Always mount your
motor to the stern motor mounting plates
when operating the boat with a Half Boat
Configuration.
CAPSIZE HAZARD
. This boat in the HALF
BOAT configuration requires motor
placement to be secured to the AFT portion
of the vessel ONLY. Bow Motor Mounts are
for FULL BOAT configuration ONLY.
Improper motor placement will significantly
decrease the stability of the vessel and
could cause it to capsize.
Technical specifications HALF BOAT
1’ 6
⅞ ” High, 4’ 4½ “ Wide, 6’ 3” Long
(479 mm High, 1334 mm Wide, 1906 mm
long)
Weight, 99 pounds (45 kg)
CCBL1 Full Boat Configuration
CCBL1 Full Boat configuration takes two
separate Half Boats and joins them with a
dovetail connector creating a full 12-foot
boat.
For Full Boat assembly, your Half Boat
products must be fitted with manufacturer-
approved Dovetail Connectors and
Latch/Pin Kits, which are fitted to the vessel