Non contractual document - Cassese France
®
- Document non contractuel
Put the first moulding in front of the back fence
1
and slide the
moulding in contact with the 2nd back fence
2
.
Move forward the sliding table
20
until
the position where you want to insert
the wedge(s) has been reached by the
WEDgE EXIT
(see picture). Then bring
the wedge position stop handle
6
against
the stapling stop
10
and tighten it.
6
Setting up the stapling position
close to the inside of the frame :
Move backwards the sliding table
20
,
until you have reached the furthest
position to the inside of the frame
where you want to insert wedge(s).
Then bring the wedge position stop
handle
5
against the stapling stop
10
and tighten it.
Now the two positions of joining are
set and the sliding table can move
only within the limits of these two
positions.
10
20
6
WEDgE
EXIT
WEDgE
EXIT
10
5
20
Setting up the stapling position close
to the outside of the frame :
Содержание CS 20 CART
Страница 2: ......
Страница 45: ...Non contractual document Cassese France Document non contractuel...
