22
23
Adjustments
Dispensing orientation
Select the side to be sprayed on the control.
Dispensing height
Operate on adjustable and orientable jet to lift or lower the jet.
Dispensing width
Operate on the nozzle to adjust the jet width (turn it clockwise to wid-
en it, counterclockwise to narrow it).
Dispensing duration
Operate on the dial of the timer on the control to
increase or decrease the duration of dispensing.
Quantity of dispensed product
Operate on the dial of the timer on the control to
increase or decrease the quantity of product to be dispensed.
Maintenance
Washing FAMILY 30
At the end of work, thoroughly wash the tank and the hydraulic circuit.
Firstly, recover any residues of pesticides into a suitable container.
Remove the cover and pour clean water. Thoroughly rinse the tank,
then operate the "Circuit washing" switch until clean water comes out
of the jets.
Drain residual water with the tap located under the tank.
Starting
• Unscrew the cover
• Pour the mixture into the tank
• Tighten the cover
• Start the control with the relevant pull-switch
on the side
• Select the desired timing according to the product millilitres to be
dispensed (check with the supplied measuring cup)
• FAMILY 30
is ready to be used
NOTE: Mix the pesticide separately in a suitable container, then pour
the solution into the tank of FAMILY 30.
Remember that, on average, approx. 200 ml of product remain
within the pipes at the end of treatment.
Operation
Select the side to be treated on the control in the cabin.
Press the button any time dispensing is required.
Operating instructions
C
