Operation and Handling
caso Master P3
56
15.4.5 Temperature
Mode
Press the
selection key >> (6)
as long as necessary to select
the temperature mode (Indicator lamp temperature (4)).
The preset temperature stage "120" is selected and the device
turns on.
With the
+ / - keys (7+8),
you can change the settings at any
time in a range from 60 – 240 °C. (Temperature stages: 60, 80,
100, 120, 140, 160, 180, 200, 220 and 240°C)
Please
note
►
In case of grilling or cooking deep fry food we would advise
you to use the function “Temperature” as in this case you can
use temperatures up to 240°C. Otherwise the overheating
protection “E05” will be activated.
15.4.6 Timer
After the selection of the temperature mode press
selection
key >> (6)
until the corresponding control lamps (5) lights up.
The display shows the number "0". With the
+ / - keys (7+8)
,
you can now select the operating time in 1-minute intervals (up
to max. 180 minutes).
Once the time is up, an acoustic signal sounds and the device
automatically goes into standby mode.
Please
note
►
During timer operation, you can change the duration at any
time with the
+ / - keys (7/8)
. With the memory function of
the device, the power stage or temperature settings remain
unchanged here.
►
During the cooking process the temperature, power level and
timer can be readjusted as you wish.
15.4.7
Lock function (children lock key)
Press the
Lock key 10
, all keys will be blocked except Master
ON/OFF (1), to avoid mal-operation. After locking, induction
hotplates continue to heat in the preset temperature or power
stage. Also the timer continues counting.
