16
Note:
you can also suck up the milk directly from the carton using the flexible hose (Figure
2/S). Check that the milk carton does not exceed the height of the frothed milk spout. The
flexible hose must be inserted down into the milk carton.
¾
To do this, attach the hose to the control valve and insert the other end of the hose (cf. Figure
10) into the milk carton.
Frothing milk
¾
Place a cup on the drip grid (Figure 1/D) under the milk discharge outlet (Figure 2/P).
¾
Switch the appliance on using the on/off switch (Figure 1/A). The indicator (red) is illuminated.
When the ready indicator (orange) is illuminated the milk frothing machine is ready for use
(Figure 1/H).
¾
Press the steam button (Figure 1/B) down fully.
Warning:
hot steam will emerge. Check that the milk container or flexible hose is attached. If
they are missing the knob for regulating the froth must be closed (Figure 5), or else hot steam
can escape from the side of the control valve.
The milk will be sucked out of the container. Inside the frothed milk spout it is mixed with steam
and frothed up. The frothed milk flows through the milk discharge outlet into the waiting cup.
Milk will continue to flow through for about 2 to 8 seconds after the steam button has been
released until the steam pressure in the system has been reduced.
Important:
using the knob for regulating the froth (Figure 2/Q) you can set the amount of froth
(more or less added air) and the temperature of the milk to your taste (Figures 4 to 6). To do
this turn the knob slowly to the right or to the left until you achieve the desired result.
Figure 4:
maximum froth/ warm milk
Figure 5:
no froth
Figure 6:
less froth/ hot milk
¾
After making the frothed milk switch the appliance off (red indicator goes off).
Important!
It is essential to clean the frothed milk spout thoroughly each time you use it to
froth milk as described in the section on cleaning.
Preparing cappuccino
For one serving of cappuccino, half or two thirds fill a large cup with espresso and then top up
with frothed milk.
Preparing cocoa
¾
Put cocoa powder, together with milk, into the container (Figure 1/L) and mix together well.
¾
Attach the container to the control valve (Figure 1/J,K).
¾
Now proceed as for frothing milk.
Cleaning
Always unplug the appliance from the mains and allow it to cool down before cleaning. Clean the
appliance casing with a damp cloth but never immerse it in water!
Cleaning the water tank (Figure 1/G)
¾
Dispose of any water remaining in the water tank and clean it if necessary in ordinary washing-
up water.
Cleaning the frothed milk spout (Figure 11)
Warning:
clean all parts that have come into contact with milk (frothed milk spout, container
including lid, seal and suction tube or flexible hose, steam nozzle, drip tray and drip grid)
immediately after use in ordinary washing-up water!
Содержание Cremino
Страница 4: ...4...
