Caso Fleischwolf FW2000
29
14.6 Copyright protection
This document is copyright protected. Braukmann GmbH reserves all the rights, including
those for photomechanical reproduction, duplication and distribution using special
processes (e.g. data processing, data carriers, data networks), even partially.
Subject to content and technical changes.
15 Commissioning
This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:
15.1 Safety information
Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
►
Packaging materials may not be used for playing. There is a danger of suffocation.
15.2 Delivery scope and transport inspection
As a rule, the FW2000 is delivered with the following components:
pusher
hopper plate
motor unit
head tube
snake
blade
3 cutting plates (fine, medium, coarse)
fixing ring
sausage accessory
dough accessory with pattern
operating instructions
Please
note
►
Examine the shipment for its completeness and for any visible damages.
►
Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
15.3 Unpacking
To unpack the device, proceed as follows:
Remove the device out of the carton and remove the packaging material.
15.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and
recycling-related points of view and can therefore be recycled. Returning the
packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste.
Take any packaging materials that are no longer required to “Green Dot” recycling
collection points for disposal.